Wolf-tooth Wolf Tooth RoadLink

Created to help you to run larger cassettes with your road, gravel or cyclocross (CX) bike, the Wolf Tooth RoadLink extends the range of your Shimano rear derailleur. Ideal for 1x drivetrains, it will help you to take on the toughest climbs.

This rear derailleur extension offsets the position of your road bike’s derailleur, making it possible to run a wider mountain bike cassette. This makes the Wolf Tooth RoadLink ideal if you’re looking to convert to a 1x setup with minimal fuss.

If you’re looking for the simplicity of a single chainring up front or even just want lower bail-out gears on your double without changing your existing groupset or losing shifting performance and chain wrap, then the RoadLink is for you.

The RoadLink is optimised for use with 10 or 11-speed 11-36T and 11-40T cassettes, Shimano road derailleurs and is best paired with Wolf Tooth’s 40-tooth GC cassette extenders and Drop-Stop chainrings.

Compatibility:

10 Speed Cassette Compatibility:

11-32T: Not Required (GS medium cage rear derailleur works)

11-34T: Single (for double chainring be sure to not exceed the derailleur’s capacity)

11-36T: Single (for double chainring be sure to not exceed the derailleur’s capacity)

11-40T: Single (for double chainrings sure to not exceed the derailleur’s capacity)

11-42T: Not supported

11 Speed Cassette Compatibility:

11-32T: Not Required (GS medium cage rear derailleur works)

11-34T: Single (for double chainring be sure to not exceed the derailleur’s capacity)

11-36T: Single (for double chainring be sure to not exceed the derailleur’s capacity)

11-40T: Single (for double chainring be sure to not exceed the derailleur’s capacity)

11-42T: Not supported

10-42T: Not supported

Double chainrings are only supported with GS (medium cage) rear derailleurs. You may need to change the front gearing so the capacity of the rear derailleur is not exceeded.

The RoadLink is optimized for the 10- and 11-speed Shimano road derailleur geometry. It also works very well with 9-speed road groups, all SRAM groups, and Campagnolo derailleurs with cassettes up to 11-36T.

Triple chainrings are not supported (medium cage rear derailleurs cannot accommodate that big of a range).

Direct Mount-native frames are not supported.

Due to the lack of a clutch mechanism on Shimano road derailleurs, secondary chain retention (front derailleur or chain device) may be needed, especially for rough or off-road use.

Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary.

Please Note: Does not change the rear derailleur’s total chain wrap capacity.

Topfunktioner:

• Material: 6061 Aluminium
• Included: Stainless Steel bolt
• Compatibility: Shimano road/gravel rear derailleurs
• Torque: 8-10Nm
• Speed: 10/11-Speed
• Maximum Cassette Size: 11-40T
• Made in the USA
• Part Numbers: WTRLINK
• Weight: 17g